Dongguan Taiji Speed Reducer Clutch Co., Ltd.

TJ-POD-B-10 hollow shaft magneitc powder brake for paper processing machine

TJ-POD-B-10 hollow shaft magneitc powder brake for paper processing machine
Product Detailed

1.High quality and reasonable price.
2.easy operation
3.no noise and nopollution and no shock
4.one year warranty

TJ-POD-B-10 hollow shaft magnetic powder brake for paper processing machine

 

This type TJ-POD-B-10 brake is widely used in paper processing machinery to control the tension,such as bag-making machines,box-making machines,book-machinery, slitters ,cutters,copy paper machines. 

 

Introduction:

 

Magnetic clutch and brake for tension control, overload protection, torque load, etc.. Such as printing, paper machine, rewinding machine, wire drawing machines, metal rolling machine, film processing machines, textile machinery, etc.; another example motors, engines, hydraulic speed reducer, and so do the loading device loading experiments.
Magnetic clutch and brake is based on electromagnetic theory and the use of magnetic transfer torque. It has the exciting current and torque delivery is linear relationship. Nothing to do with the case of slip to transfer some torque, with fast response, simple structure, no pollution, no noise, no shock and vibration energy saving advantages. Is a versatile, superior performance of the automatic control components. Magnetic clutch and brake is widely used in the buffer starting, overload protection, speed, winding system, such as winding tension control.

 

 

 

Magnetic powder Brake Characteristics
(1) high-precision torque control
Torque control with a very wide scope, and high control precision, to convey torque and exciting current into the correct proportion to achieve high-precision control.
(2) superior durability, long life
Use of heat, wear resistance, oxidation, corrosion resistance of super-super-alloy powder, long life.
(3) the stability of a fixed superior torque characteristics
Good magnetic properties of magnetic gas, and silt between the binding force of stability, sliding torque is very stable, has nothing to do with the relative rotational speed to maintain a constant torque can be sustained.
(4) Continuous operation of the use of sliding
Cooling effect of a good and uniform thermal deformation of the cooling structure, coupled with the high heat-resistant powder to allow the sliding links and braking power and big power, able to smooth sliding operation, will not cause vibration.
(5) link sleek, non-shock
Link the impact of minimal to no impact on the smooth start and stop. And the resistance torque is extremely small, does not cause unwanted heat.
(6) suitable for high-frequency operation
Quick response and special cooling structure for the use of high frequency operation.
(7)lightweight, maintenance-free, long life
Simple and lightweight type, use the high temperature of the coil and special grease bearings, and wear of the armature against prone to impose special handling wear and prolong life.

 

selection
Magnetic clutch and brake to their location of choice, in the slip under the premise of power matching, magnetic clutch on the high-level, you can choose a smaller size. If not match, it should be placed in institutions low end (the middle or rear). Work to reduce the torque to increase speed no difference.


Usage:
Magnetic clutch and brake DC power supply for excitation. Magnetic clutch during transport, often using the magnetic particle build-up somewhere, and sometimes even a "stuck" phenomenon. As long as the clutch the whole time turning 180 degrees, beating with wooden hammer several times, so that loose powder off. Or turn the lever around the shaft, so long as immediately after turning. Connection with the coupling section of the clearance fit on the proposed use. Non-axial beat. Should be carried out before use running-turn, first through 20% of the rated current operation and then power off after a few seconds, repeated several times. 500N.m more clutch. Another part of the magnetic loading. In the running-in, the magnetic powder from the top of the filler, the situation in the barrier below the excitation current gradually turning into the side.

Long-term without the magnetic clutch, should be stored in a dry place, storage products, more than one year, before the proposed use of a comprehensive maintenance. 

 

parameters

 



 

 



Copyright Notice @ 2008-2013 B2BAGE Limited and/or its subsidiaries and licensors. All rights reserved.